Alto-professional ELVIS 15SA MKII User Manual download pdf (Page 4)

HOOK

2. QUICK START - PASSIVE SPEAKER CABINET

If you use a powered mixer for the passive speakers, it is no need to use an

amplifier. make sure all the main volume controls of your power mixer are turned

down completely.

1). Connect one side of the speaker cable to the SPEAKER OUT of your powered

mixer and the other side to the Input socket of your Elvis speaker cabinet.

2). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

3). After use, turn down of the Main Mix Level control first, then turn off the

powered mixer.

Passive, Full-range, two speakers. This is the simplest set-up. You just need

a mixer and a stereo amplifier. It is good for small club gigs, disco,etc.

Make all initial connections with all the equipment powered off, and ensure that

all the main volume controls are turned down completely.

1). Connect one side of the speaker cable to the Output CHA/CHB or Binding

Post of your stereo power amplifier and the other side to the Input socket

of your Elvis speaker cabinet.

2). Complete other connections as illustrated.

3). Turn on your mixer first, then the stereo power amplifier.

4). Turn up the volume controls of your amplifier to about 70%.

5). Use PFL function to get the proper input level for the mixer, and adjust the

Main Mix Level control to manipulate the output level.

6). After use, turn off your stereo power amplifier first, then the mixer.

LINE IN

MAIN OUT L

POWERED MIXER

LINE IN

MAIN OUT R

MIXER

STEREO AMPLIFIER

500W 2500W 2

(dB)

CH1

(dB)

CH2

SIGCLIP PROT SIG CLIP PROT

12CHANNEL1000 WATT POWERED MIXERWITH

24-BITMULTI-EFFECTSPROCESSOR

LTO

APM120

1 2 3 4 5 6 7 8 9 ... 22 23

No comments

Alto-professional ELVIS 15SA MKII User Manual Page 4