Alto-professional TS115W User Manual download pdf (Page 20)

SPECIFICATIONS

Output Power: 800 W Peak (670 W LF + 130 W HF)

400 W Continuous RMS (335 W LF + 65 W HF)

Crossover: 2.5 kHz

Max SPL @ 1m: 125 dB Peak, 122 dB Continuous

Frequency Response: 65 Hz – 19 kHz (+ 3 dB)

Frequency Range: 54 Hz – 20 kHz (@ -10 dB)

Low Frequency: 12" (305 mm) woofer, 2" (51 mm) voice coil

High Frequency: Neodymium compression driver, 1" (25 mm) exit, 1" (25 mm) voice coil

Horn Coverage: 80/100° H x 60° V, nominal (@ -6 dB)

Input Control: Line/Mic –∞ to +50 dB

Max input level: +23 dBu

Impedance: 15 kΩ

External Control: Volume, power on/off with LED, clip limiter with LED, ground lift

Connectors: Input: Two 1/4" TRS or XLR

Link: One XLR

Wireless connectivity: Bluetooth (A2DP)

Wireless range: 60-80 feet (18-24 meters), typical

Protection features: Over-excursion, thermal, driver

Power supply: 100 VAC, 110-120 VAC, or 220-240 VAC; 50/60 Hz

Cabinet: Trapezoidal with floor monitor capability. Injection-molded polypropylene

with perforated steel grille

Mounting information: Integrated pole socket (36 mm diameter); 2 handles; 5 M10 threaded

sockets (2 top, 2 bottom, 1 pullback)

Dimensions (H x W x D): 25.5" x 15.1" x 14.4" (648 mm x 384 mm x 365 mm)

Weight (speaker only): 36.2 lbs. (16.4 kg)

FCC ID: Y4O-TS112W

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO

CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT

ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

SHIELDED CABLES MUST BE USED WITH THIS UNIT TO ENSURE COMPLIANCE WITH THE CLASS B FCC LIMITS.

Inrush current at initial switch-on: 4.76 A

Inrush current after power supply interruption: 4.64 A

www.altoprofessional.com/wireless

MANUAL VERSION 1.3

Bluetooth PIN #: 0000

1 2 ... 15 16 17 18 19 20

No comments

Alto-professional TS115W User Manual Page 20