Alto-professional MIXPACK User Manual download pdf (Page 4)

FEATURES

NEW

AC100V ~ 50/60Hz

110 -120V ~ 50/60Hz

220 -240V ~ 50/60Hz

RATED POWER CONSUMPTION:600W

FUSE: 100V

110-120V

220-240V

T8 AL AC250V

T4 AL AC250V

27 28

3333

3434

16 16 16

19 19 20

15 15

10 10 10 10

9999

1. POWER IN – Use the included power cable to connect the mixer to a power outlet. While the power is

switched off, plug the power cable into the mixer first, then plug the power cable into a power outlet.

2. VOLTAGE SELECTOR – This 2-position switch sets the AC input voltage for the speaker. The switch

should already be set to the correct voltage for your location. (US users should set this switch to "100-

120V" whereas UK and most European users will need to set this to "220-240V.")

3. POWER SWITCH – Turns the mixer on and off. Turn on the mixer after all input devices have been

connected. Make sure the MASTER LEVEL knob is set to "zero" before turning it on.

4. SPEAKER OUTPUTS – Connect the speakers to these outputs using 1/4" cables.

5. MIC INPUT (XLR) – Connect a microphone to these inputs with an XLR cable.

6. LINE INPUT (1/4") – Connect line-level devices to these inputs with 1/4" TRS cables.

7. LINE INPUT (1/4") – Connect line-level devices to these inputs with 1/4" TS cables.

8. HI EQ (TREBLE) – Adjusts the high (treble) frequencies of the channel.

9. MID EQ (MID) – Adjusts the mid-range frequencies of the channel.

10. LOW EQ (BASS) – Adjusts the low (bass) frequencies of the channel.

11. AUX SEND 1 – Adjusts the channel audio (pre-fader) level that is sent to the AUX SEND OUTPUT 1

and CTRL ROOM OUT.

12. AUX SEND 2 – Adjusts the channel audio (post-EQ) level that is sent to the mixer's internal effects

processor or AUX SEND 2. Turn this up for the channels that you want effects applied to. You can use

this to apply effects to individual channels. (If you have an external device connected to the AUX SEND

OUTPUT 2 jack, the internal effects processor will be bypassed.)

13. PAN – Adjusts the (mono) channel's position in the stereo field.

14. BALANCE (CH 5/6) – Adjusts the balance between Channels 5 and 6.

15. CHANNEL LEVEL – Adjusts the audio level on the channel.

16. -20 dB SWITCH – When this button is engaged, the audio of that channel will be attenuated by 20 dB.

This can help increase the headroom and reduce distortion due to an overly loud input signal that

peaks frequently.

1 2 3 4 5 6 7 8 9 ... 27 28

Comments to this Manuals

No comments

Alto-professional MIXPACK User Manual Page 4

Comments to this Manuals

Related products and manuals for Acoustics Alto-professional MIXPACK